Some of the accessories you’ll need as a new welder include: Welding cap or baseball cap worn backwards.Welding helmet (I recommend an inexpensive auto-darkening helmet to start with).So first and foremost, you need to have proper personal protection gear when welding including: There are plenty of ways to get injured while welding, ranging from serious burns to permanent eye damage and lung damage if you don’t have good ventilation. Keep your thumb or finger on the end of that wire while putting it on the spindle because it is eager to escape that spool! Put the spool plate on followed by the spring, then the knob and tighten the knob just enough to provide resistance to keep the spool from unwinding once the wire is fed into the feed system. It comes with a 1-pound spool of E71T-GS. Wire spools are loaded from the top on this unit. And finally, it weighs in at 15 pounds, which is very light for the amount of power this thing has and makes it very portable.It handles standard 4″ 2 lb wire spools.It can weld mild steel from 18 gauge to 3/16″ thick.The wire feed speed range is from 60 to 200 inches per minute.The open circuit voltage is 21.6 volts. The output amperage range is from 30 to 125 amps.It uses inverter technology for a smooth DC output with a stable arc.It is powered by 120V AC and you’ll need a 20 A circuit to operate the welder at max output.It is priced at $199.99, but it’s often on sale with a coupon for $179.99.This little welder packs a lot of punch for it small size and affordable price. I decided to start with an inexpensive flux core welder then later get a beefier stick welder.Īfter much research, I decide to start my welding adventure with the Titanium Easy Flux125 welder from Harbor Freight. As for choosing welding process to start with, it was between stick welding or flux core.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |